Kopron | Dock Levellers

Loading Bays

Logistics

Dock levellers

Electro hydraulic dock levellers with telescopic lip

Back to models

Once the vehicle floor has been lifted and the edge of the dock leveller has been placed on the truck floor, it follows the lifting and dropping of the vehicle (according to the operation that the operator is carrying out: if during loading or unloading) as well as any unbalanced side load by performing a torsion of up to 100mm.

Electro hydraulic dock levellers with telescopic lip are used in the case of side loading of the vehicle or rear loading onto a container.

They are produced in a standard mode with the following dimensions:
A Width from 2000 to 2200 mm
B Length from 2500 to 3000 mm
H Height from 470 to 800 mm
L Length of the edge from 400, 1000 mm

ico-pdf2.png
Download Data Sheet

disegnolt.png

The advantages of loading Ramps

Solid and reliable
1.png

The Kopron loading ramps are designed with a specific goal: they are solid, sturdy and reliable.  Our technicians study the critical points and design the very best solutions to achieve the highest possible level of reliability.

Personalised
2.png

The Kopron loading ramps are available in standard dimensions but may have personalised dimensions in order to adapt to Customer requirements.

Greater capacity
3.png

For situations in which the weight to be supported for the loading ramps is high, Kopron designs and creates special ramps with a greater loading capacity, capable of supporting even the most extreme situations.

Design
4.png

Apart from being structurally solid and reliable, all of the Kopron products follow unique and recognisable styles and designs.

The advantages of Sealants

Personalisation
11.png

A large range of models are available with the possibility of ad hoc creations.

Sturdy and solid construction
22.png

With hot galvanised steel tubes and without any U open profiles.

Retractable structures
33.png

To absorb bumps of the truck.

Quick installation times
44.png

Many components are pre-assembled.

The advantages of sectional Doors

Safer
111.png

Sliding with double wheel carriages without any protrusion of the side guides. Greater safety for workers and greater functionality.

Exempt from wear
222.png

The sliding guides coupled with rivet systems guarantee the absence of any rust, typical in welding of guides. Protection joints of the sandwich panel in points of greater wear.

Design and personalisation
333.png

Several compositions are available and construction flexibility for doors with specific requirements.

easyLine.png
EASY LINE GUIDES

particolari.png
FIXED ELEMENTS IN STANDARD RUBBER AND MAXI

sisnloc.png
VEHICLE WHEEL BLOCKING SYSTEM

nume.png
NUMBERS AND SIGNS

cunei.png
WEDGES WITH WHEEL BLOCKING SENSORS

pulsantiera.png
GENERAL CABLE COVER CONDUIT WITH ELECTRICAL PANEL

paracolpi.png
MAXI RUBBER SLIDING BUFFER

semafori.png
TRAFFIC LIGHTS

labbro.png
EDGE DIVIDED WITH FLAP

sensore.png
SENSOR FOR DOOR RAMP INTERCONNECTION

colonna.png
ELECTRICAL PANEL SUPPORT COLUMN


zincatura.png
GALVANIZING

COLORS OF LOADING POINTS

coloured.jpg

RAL colours available upon request of the customer

Technology, performance, optimisation of costs and energy savings are the items that professional customers require of a Kopron product.  Years of experience in this field on an international level have resulted in the creation of a team of professionals dedicated to integrated development.

In this way Kopron can provide active collaboration with its customers, satisfying the requirements of a unique and advanced product.



progettazione-integrata-bn.jpg

More than 100,000 sqm dedicated to production, located in every country to provide support to every single market and satisfy the requirements of competition with greater efficiency.  The technologically advanced machinery and highly qualified personnel guarantee the quality and punctuality of output.
The history and use of highly technologically advanced machinery allow for light and medium-heavy carpentry work to be carried out in the best possible way. 

Thanks to the range of advanced machinery available, aluminium, iron and steel working respects the quality, economic nature and guarantee of flexible and fast production, objectives requested in large and small projects.
The entire Kopron production cycle is covered by quality certificates.  The company operates in total observance of European norms and uses the services of international certification authorities such as Rina Service.

Certifications table

CERTIFICATIONS

ISO 9001 2008:
EA; 18 - EA; 29A - EA; 17 - EA; 28A


UNI EN: 1090-2 / 3834-3




CE



Steel Processing center
D.M. 14-01-2008



Applicable Standard UNI EN 13241-1



CATEGORY

Production plant


Production cycle and
welding processes




Products:
Warehouses - Closures - Ramps



Production
cycle - trasformation
of steel

Closures

ADVANTAGES FOR THE CUSTOMER

The characteristics of the
products are transparent
and available to all customers.

The responsibilities of the
manufacturer are clear and defined.


Product reliability as the
test requirements for all of
the certificates increase
the quality standard levels.

It is easier for the customer
to compare product performance
figure by figure.

ADVANTAGES FOR THE COMPANY

Increasing customer
satisfaction.

Improvements in efficiency
and effectiveness through
the optimisation of
company processes.

Greater competitiveness on
the market through certificates
that characterise a company
assessed by a non qualified company.

Improvement by personnel
in prevention intervention
and efficient management
of emergencies.

Sfoglia e scarica il pdf

THE CATALOG

Browse and Download

Rchiedi un preventivo

REQUEST A QUOTE

Without obligation

Accedi all'area riservata

RESERVED AREA

Professional technical documentation

Alcune domande alle nostre risposte

FAQ

Some answers to your questions

Chiavi in mano

TURN-KEY

A contact person for all installation phases

Assistenza

ASSISTANCE

Kopron Service, after-sales service

Case History

You can find here the latest installations, suggestions and reviews of the product of your interest.
Channel
HIGHLIGHT

Are you interested?

CORRELATED PRODUCT

Testimonial

Damiano Comito, General Manager -

Stiltrasporti

Testimonial

Festa Logistics relies on Kopron for efficient loading bays

Italy, Brescia, 18 September 2017

Mercedes Benz in Sao Paulo shows a 'new face' thanks to industrial steel buildings made by Kopron

Brazil, São Paulo, 03 August 2017

A new railway station has been opened in Sidi bel Abbes in Algeria with made-to-measure industrial folding doors by Kopron

Algeria, Sidi bel Abbes, 27 July 2017

Kopron loading bays installed for the new Decathlon logistic centre

Italy, Turin, 22 May 2017
Name and Surname
Company
Address
Telephone
Email
Product of interest
The fields marked with * are obligatory